Diverge simulation with jet flow
- This topic has 1 reply, 2 voices, and was last updated 10 months, 4 weeks ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Dear all,
In my case, I used the pressure outlet at the circle red zone, but after it ran for a while, it will be diverged. Could you suggest me anything to do in this situation?
https://drive.google.com/file/d/19kDByQqeC5OqbT_R6xnvmyxKq5p3VJHi/view?usp=drive_linkThank you so much.
Hello,
that could be a backflow caused by a strong turbulent vortex. You could use a fringe zone or define in front of an outlet a higher Smagorinsky constant which will laminarize the incoming vortices.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.