Reply To: channel3d in olb1.6 and olb1.5
OpenLB – Open Source Lattice Boltzmann Code › Forums › on OpenLB › General Topics › channel3d in olb1.6 and olb1.5 › Reply To: channel3d in olb1.6 and olb1.5
Dear Fedor
I have solved the verification of u+ and rms, thank you again for your help, and the verification of Prms seems to be good, but I don’t know whether I did it right. The literature I refer to is KIM’s universally recognized literature:Kim J, Moin P, Moser R. Turbulence statistics in fully developed channel flow at low Reynolds number[J]. Journal of fluid mechanics, 1987, 177: 133-166.
https://postimg.cc/gallery/Ywxs0C7
My wall function is 200 (rhoMethod = 2;fneqMethod = 0;wallProfile = 0).Because it seems that only in this way can the results be more consistent, I hope you can check whether this is correct
sincerely,
Fuxin He