Reply To: nvcc fatal : Option ‘–generate-code arch=compute_60’, missing code

[aseidler]

Hey Adrian,

i checked my code in respect to the examples. But still I got this error where I am a bit clueless.

[ThreadPool] Sucessfully initialized, numThreads=1
[main] Start Simulation …
[UnitConverter] —————– UnitConverter information —————–
[UnitConverter] — Parameters:
[UnitConverter] Resolution: N= 50
[UnitConverter] Lattice velocity: latticeU= 0.00712282
[UnitConverter] Lattice relaxation frequency: omega= 1.95718
[UnitConverter] Lattice relaxation time: tau= 0.510939
[UnitConverter] Characteristical length(m): charL= 0.00980004
[UnitConverter] Characteristical speed(m/s): charU= 0.01
[UnitConverter] Phys. kinematic viscosity(m^2/s): charNu= 1.0034e-06
[UnitConverter] Phys. density(kg/m^d): charRho= 998
[UnitConverter] Characteristical pressure(N/m^2): charPressure= 0
[UnitConverter] Mach number: machNumber= 0.0123371
[UnitConverter] Reynolds number: reynoldsNumber= 97.6683
[UnitConverter] Knudsen number: knudsenNumber= 0.000126316
[UnitConverter]
[UnitConverter] — Conversion factors:
[UnitConverter] Voxel length(m): physDeltaX= 0.000196001
[UnitConverter] Time step(s): physDeltaT= 0.000139608
[UnitConverter] Velocity factor(m/s): physVelocity= 1.40394
[UnitConverter] Density factor(kg/m^3): physDensity= 998
[UnitConverter] Mass factor(kg): physMass= 7.51457e-09
[UnitConverter] Viscosity factor(m^2/s): physViscosity= 0.000275173
[UnitConverter] Force factor(N): physForce= 7.55688e-05
[UnitConverter] Pressure factor(N/m^2): physPressure= 1967.1
[UnitConverter] ————————————————————-
[STLreader] Voxelizing …
[STLmesh] nTriangles=21792; maxDist2=9.57151e-07
[STLmesh] minPhysR(StlMesh)=(-0.00531261,-0.0120206,-1.79526e-06); maxPhysR(StlMesh)=(0.00531261,0.0120206,0.0500018)
[Octree] radius=0.0501762; center=(-4.90002e-05,-4.90002e-05,0.024951)
[STLreader] voxelSize=0.000196001; stlSize=0.001
[STLreader] minPhysR(VoxelMesh)=(-0.00524302,-0.011907,0.000156916); maxPhysR(VoxelMesh)=(0.00514502,0.012005,0.0499412)
[STLreader] Voxelizing … OK
[main] STL was read …
[prepareGeometry] Prepare Geometry …
[SuperGeometry3D] cleaned 0 outer boundary voxel(s)
[SuperGeometry3D] cleaned 0 outer boundary voxel(s)
[SuperGeometry3D] cleaned 0 inner boundary voxel(s) of Type 3
[SuperGeometryStatistics3D] updated
[SuperGeometry3D] the model is correct!
[CuboidGeometry3D] —Cuboid Stucture Statistics—
[CuboidGeometry3D] Number of Cuboids: 1
[CuboidGeometry3D] Delta (min): 0.000196001
[CuboidGeometry3D] (max): 0.000196001
[CuboidGeometry3D] Ratio (min): 0.448
[CuboidGeometry3D] (max): 4.58929
[CuboidGeometry3D] Nodes (min): 1799000
[CuboidGeometry3D] (max): 1799000
[CuboidGeometry3D] Weight (min): 1799000
[CuboidGeometry3D] (max): 1799000
[CuboidGeometry3D] ——————————–
[SuperGeometryStatistics3D] materialNumber=0; count=1216568; minPhysR=(-0.00543902,-0.012103,-3.90851e-05); maxPhysR=(0.00534102,0.0122011,0.0501371)
[SuperGeometryStatistics3D] materialNumber=1; count=490960; minPhysR=(-0.00543902,-0.011907,0.000156916); maxPhysR=(0.00514502,0.012005,0.0499411)
[SuperGeometryStatistics3D] materialNumber=2; count=87399; minPhysR=(-0.00543902,-0.012103,-3.90851e-05); maxPhysR=(0.00534102,0.0122011,0.0501371)
[SuperGeometryStatistics3D] materialNumber=3; count=2036; minPhysR=(-0.00485102,-0.00485102,-3.90851e-05); maxPhysR=(0.00494902,0.00494902,-3.90851e-05)
[SuperGeometryStatistics3D] materialNumber=4; count=2037; minPhysR=(-0.00485102,-0.00485102,0.0501371); maxPhysR=(0.00494902,0.00494902,0.0501371)
[prepareGeometry] Prepare Geometry … OK
[main] Define SuperLattice …
terminate called after throwing an instance of ‘thrust::system::system_error’
what(): parallel_for failed: cudaErrorSymbolNotFound: named symbol not found
Aborted

Thank you for your help so far!

-Alex