Skip to content

AddPressure

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1927
    Mamin
    Member

    Hi all,
    I want to simulate a gas (helium) in a aerodynamic lens (or just a cylinder of 1 cm radius) with smaller outlet (1mm). The pressure at the inflow is 2 mbar and 0 on the outflow. How do I add the pressure boundary condition at the inlet with and without Poiseuille inflow boundary condition.
    Thank you

    #2678
    mathias
    Keymaster

    Please have a look at the example cylinder2d, cylinder3d or aorta3d to get an idea of the set-up as well as consider to come to our next spring school in March 2018 in Karlsruhe!

    Best
    Mathias

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.