Skip to content

Hi all

New to LBM and OpenLB? Attend our upcoming one-week hands-on Spring School in Marseille/France from 19.05.2025 – 23.05.2025.

OpenLB – Open Source Lattice Boltzmann Code › Forums › on OpenLB › General Topics › Hi all

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 18, 2017 at 9:47 am #1906
    lbmcoding
    Member

    Hi all,

    In the openLB, is there a RotatingLinear2D functor? If not, how can I add this to the OpenLB?

    April 18, 2017 at 7:25 pm #2594
    mathias
    Keymaster

    Hi lbmcoding,

    you can extend the source code by your functor. I recomment to copy an existing similar one. You are also welcome to email as the code to include in the next version of OpenLB.

    Best
    Mathias

    April 19, 2017 at 4:54 pm #2603
    lbmcoding
    Member

    Dear mathias,
    Thanks for your reply. I have another question. When I handle a pipe flow simulation referring to the aorta3d examples, I found
    that in my simulation, “regionName=inflow; regionSize[m^2]=0”, “regionName=outflow; regionSize[m^2]=0” why does this happen? Are the coordinates of inflow and outflow circle incorrect? Thanks very much!

    April 19, 2017 at 5:02 pm #2604
    mathias
    Keymaster

    It looks like they are incorrect!

    April 19, 2017 at 5:20 pm #2605
    lbmcoding
    Member

    Dear mathias,
    Should I get their coordinates in the modeling software? As a general rule, how do we get this two coordinates?
    And the normal vector should orientate the external geometry?Thanks!!

    April 19, 2017 at 5:55 pm #2606
    mathias
    Keymaster

    These parameteres depend on your actual geometry, so they come from outside!

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.