Skip to content

Thermal Flow

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1961
    heng03313
    Member

    I noticed that the thermal flow examples are on natural convection. Is it possible to specify the fluid temperature of an inlet flow?

    #2788
    mgaedtke
    Keymaster

    Hello heng,

    yes, you can use the addTemperatureBoundary() on the temperature lattice and addVelocityBoundary() on the velocity/pressure lattice for the material number indicating the inlet.

    Best Regards, Max

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.